Club Car Carryall 295 Maintenance And Service Manual page 428

19
Cylinders
2279
Figure 19-63 Compress Seal
2281
Figure 19-65 Install Cushioned Piston (If Equipped)
16. Install and tighten nut to 150-185 ft-lb (203-251 N·m) torque (Figure 19-67, Page 19-35).
17. Remove the rod from the vise.
18. Install the cylinder case in the vise.
19. Put oil on the seal surface of the cylinder case (Figure 19-68, Page 19-35).
Page 19-34 2008-2012 All-Wheel Drive Maintenance and Service Manual
HYDRAULIC ATTACHMENT SYSTEM
2280
Figure 19-64 Install Head on Rod
2282
Figure 19-66 Install Cushion Sleeve (If Equipped) and
Piston