Club Car Carryall 295 Maintenance And Service Manual page 47

BODY AND TRIM
1. Remove the upper four bolts (1) and four flanged nuts (2) that secure the top structure (3) to the two side supports
(4), and remove the top structure (Figure 4-1, Page 4-7).
1
2
6
*Four Passenger
2357
Figure 4-1
2. Remove the the four bolts (5) and four flanged nuts (6) that secure the two side supports (4) to the seat support
(7) and the front cowl supports (8).
3. 2 passenger vehicles: Remove the two side supports (4). See following NOTE.
NOTE: It may facilitate removal to use a rubber mallet to disengage the rear-most tube of the side support first. Finally,
disengage the front end of the tube by simultaniously twisting side to side and lifting.
4. Remove the two hex-head bolts (24) and two flanged lock nuts (25) securing the top brace (23). Remove
top brace from vehicle.
5. Remove the hex-head bolts (18) and flanged lock nuts (19) securing the rear support tubes (16) to the rear
seat support (17).
6. Remove the hex-head bolts (21) and flanged lock nuts (22) securing the rear support tubes (16) to the tube
brackets (20) and to the forward side support tubes (4).
7. Remove the tube brackets (20) and rear support tubes (16) from the vehicle.
8. Remove the forward side supports (4).
3
5
7
8
Roll-Over Protective Structure (ROPS) – Two and Four Passenger
2008-2012 All-Wheel Drive Maintenance and Service Manual
Roll-Over Protective Structure (ROPS)
*23
*24
*21
*20
*17
6
9
10
11
12
4
*16
*25
*22
*18
*19
Page 4-7