Removing And Installing The Attachment Arm Mechanism - Club Car Carryall 295 Maintenance And Service Manual
Hide thumbs
Also See for Carryall 295:
- Maintenance and service manual (432 pages) ,
- Owner's manual (72 pages) ,
- Owner's manual (84 pages)
Table of Contents
Advertisement
HYDRAULIC ATTACHMENT SYSTEM
2222
Figure 19-3 Hand Lever Linkages and Pins
Mount
NOTE: The following picture may not show your exact attachment but mounting frame inspections are the same.
Inspect the pin mounts (1), mounting flange (2) and all welds for wear, damage and cracks (Figure 19-4, Page
19-3). Replace or repair parts as necessary.
REMOVING AND INSTALLING THE ATTACHMENT ARM MECHANISM
When the attachment arm mechanism is not being used, it can be removed from the vehicle.
NOTE: Remove the bucket or the attachment before attempting to remove the attachment arm mechanism from
the vehicle.
Attachment Arm Removal
2224
Figure 19-5 Lower Arm and Tilt Interface Forward
NOTE: When removing the cylinders from the attachment arm or the interface, the cylinders may need to be retracted
slightly. Do not have hands in the area of the cylinders when extending or retracting the cylinders.
2223
2225
Figure 19-6 Remove Interface Cylinder Retaining Pin
2008-2012 All-Wheel Drive Maintenance and Service Manual
Attachment Interface
1
Figure 19-4 Inspect Mount
19
Page 19-3
Advertisement
Table of Contents
Troubleshooting
