Fitting And Connecting The Knee Switch - Dürkopp Adler 567 Operating Instructions Manual

Set-up instructions

7.11.5 Fitting and connecting the knee switch

The knee switch is an additional component that is not part of the
standard delivery package.
Fig. 42: Fitting and connecting the knee switch
(1) - Fastening elements
(2) - Knee switch
(3) - Connecting cable
1. Screw the knee switch (2) in front of the oil pan under the table
2. Connect the ground cable for the knee switch on the back of the
3. Guide the connecting cable (3) to the back between the oil pan
4. Insert the plug (4) of the connecting cable in the socket (5) of the
Operating manual 567 Version 01.0 - 01/2015
plate using the fastening elements (1).
control.
and the control.
control.
①
②
③
④
(4) - Plug
(5) - Connector socket
⑤
61