Foot Lifting With Knee Lever - Dürkopp Adler 52Xi Service Instructions Manual

Feeding and presser foot

6.7 Foot lifting with knee lever

Proper setting
The foot stroke with the knee lever should be 12,5 mm, the space
(A) = approximately 2 mm if the knee lever is in the initial position.
Pic. 28: Foot lifting with knee lever
(1) - Screw
(2) - Lever
1. Lower the presser foot on the throat plate.
2. Loosen the screw (1).
3. Turn the lever (2) so that there is the prescribed space (A).
4. Tighten the screw (1).
5. Try to adjust the ring (3) position and test how big the foot stroke with
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
the knee lever is. Repeat this until the prescribed foot lifting is achieved.
(3) - Ring
①
②
③
39