Table of Contents
Advertisement
Step 42: Dormer Assembly
Part 1
Complete Step 42, A-H, twice to create 2 Dormer Assemblies.
A: Lay 2 (8070) Dormer Sides flat on the ground so the tops are tight together and form a peak. The side facing
up will be the back. (fig. 42.1 and 42.2)
B: Tight to the bottom of both (8070) Dormer Sides place (8073) Dormer Bottom so the outside edges are flush.
(fig. 42.1 and 42.2)
C: On the front of the assembly, centred on top of (8073) Dormer Bottom, place (8074) Dormer Burst. (fig. 42.1
and 42 .2)
D: Place (8071) Dormer Centre on the back side, flush to the bottom of (8073) Dormer Bottom so the tip is
centred at the peak of the (8070) Dormer Sides then attach with 4 (S30) #8 x 1-1/6" Wood Screws. (fig. 42.2)
E: Place 1 (8072) Dormer Side Burst tight to each side of (8071) Dormer Centre so they are flush to the bottom
of (8073) Dormer Bottom then attach with 2 (S30) #8 x 1-1/6" Wood Screws per board. (fig. 42.2)
Fig. 42.1
8072
8070
Flush
8073
Wood Parts
4 x
Dormer Side 1 x 3 x 13-5/8"
8070
2 x
Dormer Bottom 1 x 2 x 22"
8073
2 x
Dormer Burst 1 x 4 x 5-1/2"
8074
2 x
Dormer Centre 1 x 3 x 10-3/4"
8071
4 x
Dormer Side Burst 1 x 3 x 6-3/4"
8072
Tight
Front View
8074
Flush
8071
8072
8070
Flush
8074
8070
Flush
8072
Back View
Hardware
16 x
#8 x 1-1/6" Wood Screw
S30
97
8071
Flush
8070
8072
S30
Flush
Fig. 42.2
Flush
Flush
8073
Advertisement
Table of Contents
