KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 93

Step 40: Roof Panel Assembly
A: Place 1 (2751) MOD Roof Bottom tight to the bottom of (2752) MOD Roof Front and (2753) MOD Roof Back .
(fig. 40.1)
B: Place a (2761) Roof Sleeper C on the middle strip of each Roof Panel Assembly so the ends are flush and
attach with 4 (S20) #8 x 1-3/8" Wood Screws per panel. (fig. 40.2)
C: Repeat A and B to create a second Roof Panel Assembly .
Fig. 40.1
2751
Wood Parts
4 x MOD Roof Bottom 1-3/16 x 16-13/16 x 44"
2751
2 x MOD Roof Front 1-1/4 x 20-7/16 x 44"
2752
2 x MOD Roof Back 1-1/4 x 20-3/16 x 44"
2753
4 x Roof Sleeper C 3/4 x 2 x 35"
2761
2753
and
2752
Make sure
panels are tight
to each other
2751
2761
Flush
S20
x 4 per
board
2753
Hardware
16 x #8 x 1-3/8" Wood Screw
S20
93
Fig. 40.2
2752
2751