KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 68

Step 25: Attach Door Assembly to Fort
A: On the Tunnel Side Wall of Unit A measure 5/8" up from the top of (2769) Panel BT Frame and a maximum
5/8" from the inside edge of (2601) Lower Jamb then attach the remaining side of the hinges to (2601) Lower
Jamb using 3 (S13) #6 x 5/8" Pan Screws per hinge. (fig. 25.1, 25.2 and 25.3)
Fig. 25.2
Outside View
2770
5/8"
2769
5/8"
Fig. 25.1
2601
Hardware
6 x #6 x 5/8" Pan Screw
S13
68
Fig. 25.3
Door
Hinge
2601
S13