KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 103

Step 44: Attach Roof Ends
Part 1 - Unit B Side and Tunnel Side Walls
A: On the Side and Tunnel Side Walls of Unit B remove the 4 outside (H9) 1/4 x 1-1/4" Hex Bolts attached at the
top of the assembly from Step 1, Part 2 . Leave the T-nuts in . The Flat Washers and Lock Washers will be used
in Step B. (fig. 44.1)
Fig. 44.1
Unit B
Tunnel Side Wall
Remove these bolts on both Side
and Tunnel Side Walls, keeping lock
washers and flat washers for next
step. Do not remove the t-nuts.
Side Wall
103