Advertisement

RYAN'S WORLD TWISTY TOWER PLAYSET - F29135

INSTALLATION AND OPERATING INSTRUCTIONS

11' 5/8"
336 .87cm
30' 2-1/4"
9 .2m
24' 3-3/8"
7 .4m
FORT
10-14 Hrs
Two person
assembly
TUBE SLIDE
2-4 Hrs
Two person
assembly
KidKraft, Inc .
4630 Olin Road
Dallas, Texas 75244 USA
customerservice@kidkraft .com
canadacustomerservice@kidkraft .com
1 .800 .933 .0771
972 .385 .0100
For online parts replacement visit
https://parts .kidkraft .com/
WARNING
play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 30' 2-1/4" x 24' 3-3/8" (9.2m x 7.4m) area requires Protective Surfacing.
See page 3.
MAXIMUM VERTICAL FALL HEIGHT - 6' 4" (1.93m)
CAPACITY - 9 Users Maximum, Ages 3 to 10;
16' 9-5/8"
512 .2cm
Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day
cares or parks.
WARNING. Only for domestic use.
FOR OUTDOOR FAMILY DOMESTIC USE ONLY
KidKraft Netherlands BV
Olympisch Stadion 8
1076 DE Amsterdam
The Netherlands
europecustomerservice@kidkraft .com
+31 20 305 8620 M-F from 09:00 to 17:30
(GMT+1)
For online parts replacement visit
https://parts .kidkraft .eu/
To reduce the risk of serious injury or death, you must
read and follow these instructions. Keep and refer to these
instructions often and give them to any future owner of this

Table of Contents

Protective Surfacing Guidelines . . . . . . . . pg . 3
About Our Wood – Limited Warranty . . . . . pg . 5
Keys To Assembly Success . . . . . . . . . . . . pg . 6
Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg . 7
Step-By-Step Instructions . . . . . . . . . . . . pg . 14
9409135
Rev 01/21/2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RYAN'S WORLD TWISTY TOWER PLAYSET and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KidKraft RYAN'S WORLD TWISTY TOWER PLAYSET

  • Page 1 Warnings and Safe Play Instructions . . . . . pg . 2 Protective Surfacing Guidelines . . . . . . . . pg . 3 KidKraft, Inc . KidKraft Netherlands BV Instructions for Proper Maintenance .
  • Page 2 Warnings and Safe Play Instructions CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using this play system.
  • Page 3 Protective Surfacing - Reducing Risk of Serious Head Injury From Falls. One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM F1292.
  • Page 4 Instructions for Proper Maintenance Your KidKraft Play System is designed and constructed of quality materials with your child’s safety in mind. As with all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your Play Set, it is important that you, the owner, properly maintain it.
  • Page 5 About Our Wood KidKraft Premium Play Systems uses only premium playset lumber, ensuring the safest product for your children’s use. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
  • Page 6 Keys to Assembly Success Tools Required • Tape Measure • #1, #2 & #3 Phillips • Open End Wrench • 3/16” Hex Key • Carpenters Level or Robertson Bits (7/16”, 1/2” & 9/16”) • 8’ Step Ladder • Carpenters Square or Screwdriver •...
  • Page 7 Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) 1x - 9890 - 31 .8 x 76 .2 x 2336 .8 mm - 3839890 1-1/4 x 3 x 92" 1x - 9891 - 31 .8 x 76 .2 x 2336 .8 mm - 3839891 1-1/4 x 3 x 92"...
  • Page 8 Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) 1x - 9909 - 31 .8 x 76 .2 x 939 .7 mm - 3839909 1-1/4 x 3 x 37" 2x - 9910 - 31 .8 x 60 .3 x 317 .5 mm - 3839910 1-1/4 x 2-3/8 x 12-1/2"...
  • Page 9 Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) 4x - 9925 - 15 .9 x 82 .6 x 750 .5 mm - 3589925 5/8 x 3-1/4 x 29-9/16" 1x - 9926 - 38 .1 x 76 .2 x 1003 .3 mm - 3589926 1-1/2 x 3 x 39-1/2"...
  • Page 10 Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) Part Identification (Reduced Part Size) 1x - 9933 - 15 .9 x 82 .6 x 939 .7 mm - 3839933 5/8 x 3-1/4 x 37" 2x - 9934 - 15 .9 x 85 .7 x 348 .1 mm - 3839934 5/8 x 3-3/8 x 13-11/16"...
  • Page 11 Hardware Identification (Actual Size) 7 .9mm 6 .4mm 20x TN2 - 5/16" (54503300) 56x FW1 - 1/4" - (51103200) 13x LW2 - 5/16" - (51303300) 1/4" 59x LN1 - - (54303200) 6 .4mm 7 .9mm 7 .9mm 6 .4mm 63x LW1 - 1/4" - (51303200) 11x LN2 - 5/16"...
  • Page 12 (Actual Size) Hardware Identification 5/16 x 2-5/8" 4x WB10 - - (53613329) 7 .9 x 66 .7mm " 8x PB2 - 1/4 x 1-1/4 - (53433212) 6 .4 x 31 .8mm 1/4 x 2-1/2" 2x WL5 - - (52613222) 1/4 x 3" H12 - - (53703230) 6 .4 x 63 .5mm...
  • Page 13 Part Identification (Reduced Part Size) 1x - 3329135 (6 Pk) 3320353 1x - 1x - 9200258 1x - 9320374 1x - #2 x 2" 9200014 1x - 3310223 1x - 3310222 1x - 9200015 1x - 3320161 1x - 3200718 (7Pk) 1x - 3202001 (6Pk) 9x - 3310221 1x - 3201645 (2pk)
  • Page 14 • The carton I .D . stamp is located on the end of each carton . The tracking number is located on the KidKraft ID Plaque (9320374) . • Please retain this information for future reference . You will need this information if you contact the Consumer Relations Department .
  • Page 15 Step 2 Make sure the assembly is square. Note hole orientation 9893 9902 9892 9901 9892 9901 9892 9902 Note hole Flush orientation Wood Parts Hardware 6.4 x 63.5 mm (1/4 x 2-1/2”) 31.8 x 76.2 x 2336.8 mm (1 1/4” x 3” x 92”) 31.8 x 76.2 x 939.7 mm (1 1/4”...
  • Page 16 Step 3 Make sure the assembly is square. Note hole orientation 9923 9896 9890 9900 9891 9900 9891 Note hole orientation Top View 9890 9900 9896 9923 9891 Wood Parts Hardware 6.4 x 63.5 mm (1/4 x 2-1/2”) 31.8 x 133.4 x 939.8 mm ( 1 1/4” x 5 1/4” x 37”) 31.8 x 76.2 x 2336.8 mm ( 1 1/4”...
  • Page 17 Step 4 9897 9897 Wood Parts Hardware 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW1, LW1, TN1) 31.8 x 76.2 x 1498.5 mm ( 1 1/4” x 3” x 59”) 9897...
  • Page 18 Step 5 9902 Note hole orientation 9902 Wood Parts Hardware 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW1, LW1, TN1) 31.8 x 76.2 x 939.7 mm (1 1/4” x 3” x 37”) 9902...
  • Page 19 Step 6 9905 9904 9898 9904 9905 9905 9898 Wood Parts Hardware 7.9mm x 35 mm (5/16 x 1-3/8”)(FW2, LW2, TN2) 31.8 x 76.2 x1187.4 mm ( 1 1/4” x 3” x 46 3/4”) 9904 31.8 x 76.2 x 853.4 mm (1 1/4” x 3” x 33 5/8”) 9905 31.8 x 76.2 x1187.4 mm (1 1/4”...
  • Page 20 Step 7 9895 9895 Wood Parts Hardware 31.8 x 76.2 x 1922 mm ( 1 1/4” x 3” x 75 11/16”) 6.4 x 108 mm (1/4 x 4-1/4”) (LW1, FW1, TN1) 9895...
  • Page 21 Step 8 Pre-drill each hole using a 3/16” drill bit for WL5. 2607 2607 Hardware Wood Parts 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW1, LW1, TN1) 31.8 x 76.2 x 558.8 mm (1-1/4 x 3 x 22”) 2607 6.4 x 63.5 mm (1/4 x 2-1/2”)
  • Page 22 Step 9 Note hole orientation 9894 9894 9899 9899 9894 9894 Note hole 9899 orientation 9894 Wood Parts Hardware 31.8 x 76.2 x 1187.4 mm ( 1 1/4” x 3” x 46 3/4”) 6.4 x 108 mm (1/4 x 4-1/4”) (LW1, FW1, TN1) 9899 31.8 x 76.2 x 1187.4 mm ( 1 1/4”...
  • Page 23 Step 10 Pre-drill each hole using a 3/16” drill bit 2607 for WL5. 2607 Hardware Wood Parts 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW1, LW1, TN1) 31.8 x 76.2 x 558.8 mm (1-1/4 x 3 x 22”) 2607 6.4 x 63.5 mm (1/4 x 2-1/2”)
  • Page 24 Step 11 9906 9906 (Hidden) 9906 WB10 WB10 Wood Parts Hardware 7.9 x 66.7 mm (5/16 x 2-5/8”) (FW2, TN2) 38.1 x 38.1 x 1054.5 mm (1 1/2” X 1 1/2” X 41 1/2”) WB10 9906 #8 x 64mm (#8 x 2-1/2”)
  • Page 25 Step 12 5/8” 16 mm 9907 9907 Hardware Wood Parts 31.8 x 76.2 x 1060.5 mm ( 1 1/4” X 3” X 41 3/4”) #8 x 76.2 mm (#8 x 3”) 9907...
  • Page 26 Step 13 FW1 LW1 9874 9874 9874 Hardware Wood Parts 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW1, LW1, TN1) 31.8 x 76.2 x 381 mm (1 1/4” x 3” x 14 15/16”) 9874 #8 x 76.2 mm (#8 x 3”) #8 x 50.8 mm (#8 x 2”)
  • Page 27 Step 14 9873 9873 9873 9873 9873 Hardware Wood Parts 31.8 x 76.2 x 381 mm (1-1/4 x 3 x 15”) #8 x 76.2 mm (#8 x 3”) 9873 #8 x 50.8 mm (#8 x 2”)
  • Page 28 Step 15 0457 0457 0457 0457 9935 9933 0457 9933 5/8” (16mm) 9935 Flush 0457 Hardware Wood Parts 25.4 x 50.8 x 209.6 mm (1” x 2” x 8 1/4”) 10 x #8 x 38.1mm (#8 x 1-1/2”) 0457 15.9 x 82.6 x 939.7 mm (5/8” x 3 1/4” x 37”) 9933 15.9 x 69.9 x 939.7mm (5/8”...
  • Page 29 Step 16 0461 0461 0457 9935 Tight 0461 Hardware Wood Parts 25.4 x 50.8 x 318.9 mm (1” x 2” x 12 9/16”) #8 x 64mm (#8 x 2-1/2”) 0461...
  • Page 30 Step 17 0461 0461 Flush 669 .9mm 26-3/8” 0461 Hardware #8 x 64mm (#8 x 2-1/2”) #8 x 38.1mm (#8 x 1-1/2”)
  • Page 31 Step 18 S38 S38 S38 S38 S38 0455 9936 0455 Flush 9934 Hardware Wood Parts 23 x #7 x 28.5mm (#7 x 1-1/8”) 15.9 x 85.7 x 348.1mm ( 5/8” x 3 3/8” x 13 11/16”) 9934 15.9 x 34.9 x 939.7 mm ( 5/8” x 1 3/8” x 37”) 9936 15.9 x 50.8 x 171.5mm ( 5/8”...
  • Page 32 Step 19 3320969 #6 x 9mm Blunt tip screw 3320969 (hidden) 3320969 3320969 Other Parts 3320969...
  • Page 33 Step 20 9924 9924 9924 9924 9924 9924 9924 9924 9924 9924 9924 9924 122 .4mm 122 .4mm 122 .4mm 122 .4mm 122 .4mm 122 .4mm 4-3/4” 4-3/4” 4-3/4” 4-3/4” 4-3/4” 4-3/4” Hardware Wood Parts 18 x #8 x 35mm (#8 x 1-3/8”) 15.9 x 82.6 x 669.9mm ( 5/8”...
  • Page 34 Step 21 IMPORTANT! Follow hole pattern. Pre-drill holes using a 1/8” drill bit. Do not attach until Step 25 9918 9918 9919 9918 9919 9918 9984 9917 9917 183mm 183mm 183mm 183mm 183mm 183mm 7-1/4” 7-1/4” 7-1/4” 7-1/4” 7-1/4” 7-1/4” 9918 9918 9918...
  • Page 35 Step 22 Note: Make sure all hardware is used to properly secure each rock. 3329135 Do not attach until Step 25 3329135 3329135 3329135 3329135 Hardware Other Parts 7.9mm x 32 mm (5/16 x 1-1/4”) (FW0, LW1, BN1) 3329135 #8 x 25.4 mm (#8 x 1”)
  • Page 36 Step 23 Pre-drill holes using a 1/8” drill bit. 9916 9916 Wood Parts Hardware 15.9 x 76.2 x 524.5 mm (5/8” x 3” x 20 5/8”) #8 x 35mm (#8 x 1-3/8”) 9916...
  • Page 37 Step 24 Flush Hardware #8 x 35mm (#8 x 1-3/8”)
  • Page 38 Step 25 Pre-drill holes using a 1/8” drill bit. 9918 Hardware #12 x 50.8mm (#12 x 2”)
  • Page 39 Step 26 9320 9320 Hardware Wood Parts 31.8 x 529.1 x 935.7mm ( 1 1/4” x 20 7/8” x 36 13/16”) #8 x 64mm (#8 x 2-1/2”) 9320 #8 x 35mm (#8 x 1-3/8”)
  • Page 40 Step 27 9924 9924 9924 9924 9924 9924 122 .4mm 122 .4mm 122 .4mm 122 .4mm 122 .4mm 122 .4mm 4-3/4” 4-3/4” 4-3/4” 4-3/4” 4-3/4” 4-3/4” 9924 9924 9924 9924 9924 9924 Hardware Wood Parts 18 x #8 x 35mm (#8 x 1-3/8”) 15.9 x 82.6 x 669.9mm ( 5/8”...
  • Page 41 Step 28 9924 9924 9924 9924 9924 9924 9924 9924 130 .4mm 130 .4mm 130 .4mm 130 .4mm 130 .4mm 130 .4mm 130 .4mm 130 .4mm 5-1/8” 5-1/8” 5-1/8” 5-1/8” 5-1/8” 5-1/8” 5-1/8” 5-1/8” (hidden) 9924 9924 9924 9924 9924 9924 9924 9924...
  • Page 42 Step 29 9908 9908 9908 9908 9908 Hardware Wood Parts 31.8 x 76.2 x 355.6mm ( 1 1/4” x 3” x 14”) 6.4mm x 76.2 mm (1/4 x 3”) (FW1, LW1, TN1) 9908...
  • Page 43 Step 30 x 2 9922 9921 9920 9921 9920 Hardware Wood Parts 38.1 x 76.2 x 1221.3mm ( 1 1/2” x 3” x 48 1/16”) 6.4mm x 69.9mm (1/4 x 2-3/4”)(FW1, LW1, TN1) 9921 31.8 x 76.2 x 1655.3mm ( 1 1/4” x 3” x 65 3/16”) 9920 #8 x 76.2 mm (#8 x 3”) 38.1 x 76.2 x 1221.3mm ( 1 1/2”...
  • Page 44 Step 31 9942 9943 9938 9938 9939 9939 9940 9940 9941 maintain opening width of 22.7cm (8-15/16") 35mm 1-3/8” Flush Flush min. 2.5cm (1") clearance on both sides in this location 227mm 35mm 35mm 8-15/16” 1-3/8” 1-3/8” Hardware Wood Parts 15.9 x 114.3 x 360.6mm ( 5/8”...
  • Page 45 Step 32 Outside view Inside view 9937 9937 9974 Hardware Wood Parts 19.1 x 76.2 x 507.8mm ( 3/4” x 3” x 20”) 18 x #8 x 28.5mm(#8 x 1-1/8”) 9937 19.1 x 76.2 x 225mm ( 3/4” x 3” x 8 7/8”) 9974...
  • Page 46 Step 33 P-U-5588-WT P-U-5588-WT Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) P-U-5588-WT...
  • Page 47 Step 34 Flush 590mm 23-1/4” Flush 590mm 23-1/4” Flush 9926 9927 9927 9928 9928 590mm 23-1/4” Wood Parts Hardware 38.1 x 76.2 x 1003.3mm (1 1/2” x 3” x 39-1/2”) 16 x #8 x 64mm (#8 x 2-1/2”) 9926 25.4 x 50.8 x 1003.3mm ( 1” x 2” x 39-1/2”) 9927 25.4 x 50.8 x 1003.3mm ( 1”...
  • Page 48 Step 35 9929 9929 9929 Wood Parts Hardware 15.9 x 76.2 x 1080.1mm (5/8” x 3” x 42-1/2”) #8 x 35mm (#8 x 1-3/8”) 9929...
  • Page 49 Step 36 9338465 9338465 9338465 Pre-drill each hole using a 1/8” drill bit . Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) 9338465...
  • Page 50 Step 37 9338464 9338464 9338464 Pre-drill each hole using a 1/8” drill bit . Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) 9338464...
  • Page 51 Step 38 9337766 9337766 9337766 9337766 Pre-drill each hole using a 1/8” drill bit . Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) 9337766...
  • Page 52 Step 39 9338465 9338465 9338465 Pre-drill each hole using a 1/8” drill bit . Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) 9338465...
  • Page 53 Step 40 9338464 9338464 9338464 Pre-drill each hole using a 1/8” drill bit . Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) 9338464...
  • Page 54 Step 41 9337766 9337766 9337766 9337766 Pre-drill each hole using a 1/8” drill bit . Hardware Other Parts #8 x 22.2 mm (#8 x 7/8”) 9337766...
  • Page 55 Step 42 Pre-drill each hole using a 1/8” drill bit. 9930 9930 9930 9930 9930 9930 Wood Parts Hardware 15.9 x 76.2 x 1026.7mm (5/8” x 3” x 40 7/16”) #8 x 50.8 mm (#8 x 2”) 9930...
  • Page 56 Step 43 (Hidden) Hardware 6.4mm x 108mm (1/4 x 4-1/4”)(FW1, LW1, TN1)
  • Page 57 Step 44 20-5/8” (523mm) 9975 9975 Hardware Wood Parts #8 x 35mm (#8 x 1-3/8”) 15.9 x 50.8 x 696mm ( 5/8” x 2” x 27 3/8”) 9975...
  • Page 58 Step 45 9759135 9759135 9759135 Hardware Other Parts 16 x #8 x 12.7mm(#8 x 1/2”) (FW3) 9759135...
  • Page 59 Step 46 9877 Notice Angle Orientation 3202001 3202001 Make sure triangle is tight against beam WARNING: For your child’s safety, orientate the swing hangers as shown to ensure your swing will have proper swing motion when installed. Failure to do so could result in premature failure of the swing hanger or swing chain.
  • Page 60 Step 47 IT IS IMPORTANT THAT THIS BOLT IS ATTACHED. IT WILL MINIMIZE CHECKING OF WOOD. 3320353 Hardware Other Parts 7.9mm x 76.2mm (5/16 x3”)(FW2 , TN2) 3320353 #6 x 25.4 mm (#6 x 1”)
  • Page 61 Step 48 3201645 Hardware Other Parts 7.9 x 95 mm (5/16 x 3-3/4”) (2 x FW2, LN2) 3201645...
  • Page 62 Step 49 2613 2615 2613 Wood Parts Hardware 50.8 x 76.2 x 2201.9 mm (2 x 3 x 86-11/16”) 7.9 x 139.7 mm (5/16 x 5-1/2”) (LW2, FW2, TN2) 2613 76.2 x 76.2 x 1294.3 mm (3 x 3 x 50-15/16”) 2615...
  • Page 63 Step 50 IT IS IMPORTANT THAT THESE BOLTS ARE ATTACHED. THEY WILL MINIMIZE CHECKING OF WOOD. 2616 2616 Wood Parts Hardware 23.8 x 82.6 x 1181.1mm (15/16 x 3-1/4 x 46-1/2”) 7.9mm x 101.6mm (5/16 x 4”) (LW2, FW2, TN2) 2616 7.9mm x 76.2mm (5/16 x 3”) (LW2, FW2, TN2)
  • Page 64 Step 51 9201643 G21 G21 9201644 Hardware Other Parts 7.9 x 95 mm (5/16 x 3-3/4”) (2 x FW2, LN2) 9201643 9201644...
  • Page 65 Step 52 Hardware 7.9mm x 44.5 mm (5/16 x 1-3/4”) ( LN2, 2 x FW2)
  • Page 66 Step 53 9909 Note hole orientation 9909 Hardware Wood Parts 31.8 x 76.2 x 939.7mm ( 1 1/4” x 3” x 37”) 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW1, LW1, TN1) 9909...
  • Page 67 Step 54 9982 9982 9982 Note hole orientation Hardware Wood Parts #8 x 64mm (#8 x 2-1/2”) 15.9 x 133.4 x 374.7mm ( 5/8” x 5 1/4” x 14 3/4”) 9982...
  • Page 68 Step 55 9931 9931 9931 Hardware Wood Parts #8 x 35mm (#8 x 1-3/8”) 15.9 x 63.5 x 939.7mm ( 5/8” x 2 1/2” x 37”) 9931...
  • Page 69 Step 56 9910 9912 15 .9mm 5/8” 9910 9912 9910 Hardware Wood Parts #8 x 35mm (#8 x 1-3/8”) 31.8 x 60.3 x 317.5mm ( 1 1/4” x 2 3/8” x 12 1/2”) 9910 31.8 x 60.3 x 341.9mm ( 1 1/4” x 2 3/8” x 13 7/16”) 9912 #8 x 76.2mm (#8 x 3”)
  • Page 70 Step 57 9932 9932 Hardware Wood Parts #8 x 76.2mm (#8 x 3”) 31.8 x 76.2 x 288mm ( 1 1/4” x 3” x 11 5/16”) 9932...
  • Page 71 Step 58 9072 9911 9913 9072 9913 9072 Hardware Wood Parts 31.8 x 82.6 x 755.7mm ( 1 1/4” x 3 1/4” x 29 3/4”) 7.9mm x 54 mm (5/16 x 2-1/8”)(FW2, LW2,TN2) 9911 31.8 x 82.6 x 755.7mm ( 1 1/4” x 3 1/4” x 29 3/4”) 9913 25.4 x 50.8 x 866.8mm ( 1”...
  • Page 72 Step 59 9043 9043 Hardware Wood Parts 31.8 x 50.8 x 698.5mm ( 1 1/4” x 2” x 27 1/2”) #8 x 50.8 mm (#8 x 2”) 9043...
  • Page 73 Step 60 8115 Hardware Wood Parts 23.8 x 82.6 x 647.7mm ( 15/16” x 3 1/4” x 25 1/2”) #8 x 50.8 mm (#8 x 2”) 8115...
  • Page 74 Step 61 Hardware #8 x 50.8 mm (#8 x 2”) #8 x 76.2mm (#8 x 3”)
  • Page 75 Step 62 9983 9983 Wood Parts Hardware 15.9 x 82.6 x 374.7mm ( 5/8” x 3 1/4” x 14 3/4”) 9983 #8 x 63.5 mm (#8 x 2-1/2”)
  • Page 76 Step 63 9914 9915 9914 9914 9915 Hardware Wood Parts 15.9 x 114.3 x 754.5mm ( 5/8” x 4 1/2” x 29 11/16”) 16 x #8 x 35mm (#8 x 1-3/8”) 9914 15.9 x 114.3 x 754.5mm ( 5/8” x 4 1/2” x 29 11/16”) 9915...
  • Page 77 Step 64 (hidden) 9925 9925 9925 9925 9925 9925 9925 9925 (hidden) 118mm 118mm 4-11/16” 4-11/16” 9925 9925 Hardware Wood Parts 15.9 x 82.6 x 750.5mm ( 5/8” x 3 1/4” x 29 9/16”) 9925 12 x #8 x 28.5mm(#8 x 1-1/8”)
  • Page 78 Step 65 x 4 3310221 3310221 Hardware Other Parts 32 x 6.3mm x 19 mm (1/4 x 3/4”) (LN1) 3310221...
  • Page 79 Step 66 3310222 3310223 Hardware Other Parts 6.3mm x 19 mm (1/4 x 3/4”) (LN1) 3310222 3310223...
  • Page 80 Step 67 3310224 3310221 Hardware Other Parts 3310224 6.3mm x 19 mm (1/4 x 3/4”) (LN1) 3310221...
  • Page 81 Step 68 Pre-drill each hole using a 1/8” drill bit. Making sure the pre-drilled holes are a minimum of 1” deep. Hardware 14 x #12 x 25.4mm (#12 x 1”) #12 x 50.8mm (#12 x 2”)
  • Page 82 Step 69 Quadrex Driver Note: Keep all bolts loose until further step. Use Quadrex Driver as a guide pin for each hole before inserting bolt. Align each elbow using the molded arrows. Use special driver provided in locations where the curve of the elbow are difficult to reach with a standard driver.
  • Page 83 Step 70 x 3 Quadrex Driver Note: Keep all bolts loose until further step. Use Quadrex Driver as a guide pin for each hole before inserting bolt. Use special driver provided in locations where the curve of the elbow are difficult to reach with a standard driver.
  • Page 84 Step 71 Use a 7/16” open end wrench to hold nut and then tighten bolt with Quadrex Driver. 3310224 3310221 3310232 3310221 3310232 Hardware Other Parts 6.4mm x 19 mm (1/4 x 3/4”) (LN1) 3310232...
  • Page 85 Step 72 Tighten all slide bolts before the clamp rings go on in the next step. 54902200 54902200 53453202 53453202 54902200 53453202 53453202 54902200 53453202 54902200 Align each elbow using the molded arrows. 53453202 54902200 Other Parts 54902200 1/4” x 12.7mm 53453202...
  • Page 86 Step 73 Warning. Do not over tighten the clamp rings. 9300230 9300230 After the clamp rings are attached to the elbows, fasten them end to end 9300230 with two pan bolts and lock nuts 9300230 9300230 9300230 9300230 Note: For ease of assembly bottom set of clamp rings can be rotated 90...
  • Page 87 Step 74 Remove PB1 (1/4 x 3/4” Pan Bolt), The bolt (PB1) will no longer be needed, but keep the lock nut (LN1) 9200258 Note: Flat end down Install PB6 (1/4 x 1” Pan Bolt) with flat washer (FW1) Hardware Other Parts 6.4mm x 25.4 mm (1/4 x 1”) (FW1) 9200258...
  • Page 88 Step 75 8965 8965 Hardware Wood Parts #8 x 50.8mm (#8 x 2”) 31.8 x 76.2 x 514.4mm ( 1 1/4” x 3” x 20 1/4”) 8965 6.4mm x 108mm (1/4 x 4-1/4”)(FW1, LW1, TN1)
  • Page 89 Step 76 9203657 53452209 9203657 54902200 9203656 9203656 Pre-drill with a 1/8” drill bit. Hardware Other Parts #7 x 15.87mm (#7 x 5/8”) 54902200 9203657 #12 x 25.4mm (#12 x 1”) 1/4 x 14.5mm 9203656 53452209...
  • Page 90 Step 77 Note: Pre-drill all holes using a 1/8” drill bit before installing the pan screws. Place Slide centred in the opening. 7311949 7311949 7311949 Other Parts Hardware #12 x 50.8 mm (#12 x 2”) 7311949...
  • Page 91 Step 78 3320161 Other Parts Hardware #8 x 50.8mm (#8 x 2”) 3320161...
  • Page 92 Step 79 3320969 Hardware #8 x 22.2 mm (#8 x 7/8”)
  • Page 93 Step 80 3320969...
  • Page 94 Step 81 MOVE FORT TO FINAL LOCATION PRIOR TO STAKING FINAL LOCATION MUST BE LEVEL GROUND Warning! To prevent tipping and avoid potential injury, stakes must be driven 13”(330mm) into ground. Digging or driving stakes can be dangerous if you do not 9290318 check first for under-ground 13”...
  • Page 95 Step 82 3200173 3200173 (48") (48") 3200173 9320230 3200173 Caution: Threaded Quick Links must be installed with the gate completely down covering the threads and tighten as instructed. 3200020 3200173 3200020 Quick Link Threaded Quick Links Tighten Threaded Quick attach to seat . Link using adjustable 9320230 wrench...
  • Page 96 Step 83 3200173 (20") 3200173 9724904 Caution: Threaded Quick Links must be installed with the gate completely down covering the 3200173 3200173 threads and tighten as instructed. 3200022 3200173 3200022 9724904 Quick Link Threaded Quick Links Tighten Threaded Quick attach to Acro Bar . Link using adjustable wrench Other Parts...
  • Page 97 POUR LES ENFANTS DE 3 À 10 ANS D'ÂGE; limite de 110 Livres par enfant. Nombre maximum d’ utilisateurs, installation et d'utilisation; d'autres informations sont disponibles sur: www.KidKraft.com Contact us at: KidKraft Dallas, TX 75244 USA 1-800-933-0771 Tracking Number: Numèro de Suivi:...
  • Page 98 NOTES...
  • Page 99 NOTES...
  • Page 100 Would you recommend the purchase of our products to friends and family? Comments: MAIL TO: Fill out your registration card online at KidKraft https://prdregistration.kidkraft.com/ 4630 Olin Road Dallas, TX 75244 United States KidKraft would like to say Thank You for Attention: Customer Service your time and feedback.

This manual is also suitable for:

F29135

Table of Contents