KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 109

Step 47: Attach Steering Wheel
Part 1
A: On the Swing Wall of Unit B measure 2" in from each slat and 1-1/2" down from the top of (2756) Siding
Assembly then pre-drill 2 holes with a 3/16" drill bit. (fig. 47.1, 47.2 and 47.3)
B: Centred between the first 2 pre-drilled holes measure 3/4" down and pre-drill a third hole. (fig. 47.1 and
47 .2)
C: Place (9083) Steering Wheel Block on the inside and flush to the top of (2756) Siding Assembly and
covering the pre-drilled holes then attach from the outside through the pre-drilled holes with 3 (S20) #8 x
1-3/8" Wood Screws. (fig. 47.3 and 47.4)
Unit B
Fig. 47.1
Fig. 47.3
Outside View
Flush
2756
Wood Parts
1 x Steering Wheel Block 1-1/4 x 3 x 19-1/4"
9083
Swing Wall
9083
S20
3 x
S20
2"
1-1/2"
Slat
2756
Hardware
#8 x 1-3/8" Wood Screw
109
Fig. 47.2
Inside View
2"
2756
Flush
Fig. 47.4
Inside View
9083
3/4"
Slat