KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 21

Step 1: Side Wall Prep
Part 2
It is important to assemble the frame on a flat, smooth surface.
D: Turn the assembly over, place (2774) Upright in the middle grooves of (2775) Panel Cross Support and
(2772) Panel Floor Support then attach all boards with 8 (H9) 1/4 x 1-1/4" Hex Bolts (with lock washer and flat
washer) connecting to the previously installed t-nuts. (fig. 1.3 and 1.4)
E: Repeat steps A-D to make 3 more Side Wall Assemblies .
Fig. 1.3
2775
2770
Wood Parts
4 x Upright 1-1/4 x 3 x 42"
2774
H9
x 3
2774
Fig. 1.4
LW1
2771
Flush
Hardware
32 x 1/4 x 1-1/4" Hex Bolt
H9
(1/4" lock washer & 1/4" flat washer)
21
H9
x 3
2772
H9
FW1
H9
x 2