KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 106

Step 45: Attach Roof Assembly to Fort
Part 1
A: With 2 people on the ground and at least 1 person in Unit A, lift 1 Roof Assembly up and over the Swing Wall
side of the fort. Guide the Roof Assembly onto the fort so all four (2760) Roof Supports sit flush to the front and
outside edges of (2759) Roof Ends. Dormer Assembly faces Unit B. (fig. 45.1 and 45.2)
B: Attach (2760) Roof Supports to (2759) Roof Ends with 1 (S3) #8 x 2-1/2" Wood Screw per support. (fig. 45.1
and 45 .2)
C: Repeat A and B for Unit B lifting it over the Side Wall so the Dormer Assembly faces the Front. (fig. 45.1 and
45 .2)
Fig. 45.1
Fig. 45.2
Roof
Assembly
Unit A
2760
2759
Dormer
Swing
Assembly
Wall
Front
Wall
Hardware
8 x #8 x 2-1/2" Wood Screw
S3
106
Roof
Assembly
Unit B
Side
Wall
S3
Flush