Table of Contents
Advertisement
Step 21: Attach Hand Grip to Fort
A: Measure 6" from the top of the floor boards on the left hand side of each Rock Board, pre-drill with a 1/8"
drill bit then attach 1 Hand Grip per wall with 2 (WL3) 1/4 x 1-3/8" Wafer Lags per Hand Grip. (fig. 21.1)
Hand Grip
Fig. 21.1
WL3
6"
Hardware
Other Parts
4 x
1/4 x 1-3/8" Wafer Lag
2 x Hand Grip
WL3
62
Advertisement
Table of Contents
