KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 23

Step 2: Front Wall Prep
Part 2
It is important to assemble the frame on a flat, smooth surface.
D: Turn the assembly over then attach all boards with 6 (H9) 1/4 x 1-1/4" Hex Bolts (with lock washer and flat
washer) connecting to the previously installed t-nuts. (fig. 2.3 and 2.4)
E: Repeat steps A-D to make a second Front Wall Assembly .
Fig. 2.3
2769
2770
Fig. 2.4
LW1
12 x
2771
2768
H9
Hardware
1/4 x 1-1/4" Hex Bolt
H9
(1/4" lock washer & 1/4" flat washer)
23
H9
x 2 per board
2769
FW1