Fig. 3.8 - KidKraft KINGSBRIDGE Installation And Operating Instructions Manual

Step 3: Swing Wall Prep
Part 4
It is important to assemble the frame on a flat, smooth surface.
I: Attach the top board in each (2756) Siding Assembly to (2757) LT Post Assembly and (2758) RT Post
Assembly with 4 (S30) #8 x 1-1/16" Wood Screws per board. (fig. 3.8 and 3.9)
J: Attach the remaining boards in each (2756) Siding Assembly to (2757) LT Post Assembly and (2758) RT Post
Assembly with 2 (S0) #8 x 7/8" Truss Screws per board. (fig. 3.8 an 3.9)
K: Repeat steps A-J to make a second Swing Wall Assembly .

Fig. 3.8

S30
x 4
Fig. 3.9
S30
2756
S0
2757
x 10
Top Board
16 x
40 x
2758
S30
x 4
S0
x 10
Remaining Boards
Hardware
#8 x 1-1/16" Wood Screw
S30
#8 x 7/8" Truss Screw
S0
27
2756
S0