KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 99

Step 43: Attach Roof Ends
Part 1 - Unit A Front Wall
A: On the Front Wall of Unit A remove the 2 outside (H9) 1/4 x 1-1/4" Hex Bolts attached at the top of the
assembly from Step 2, Part 2 . Leave the T-nuts in . The Flat Washers and Lock Washers will be used in Step B .
(fig. 43.1)
Fig. 43.1
Unit A
Remove these bolts on Unit A Front
Wall, keeping lock washers and flat
washers for next step. Do not remove
the t-nuts.
99
Front Wall