Table of Contents
Advertisement
Step 41: Roof Assembly
Part 1
Complete Step 41, A-D, twice so there are 2 Roof Assemblies
A: Place Front Roof Panel against Back Roof Panel so the tops form a peak then tight to the inside edge of the
outside slats attach 1 Narrow Angle Bracket per slat with 2 (S0) #8 x 7/8" Truss Screws per bracket. (fig. 41.1
and 41 .2)
B: Attach the third Narrow Angle Bracket centred on the middle slat with 2 (S0) #8 x 7/8" Truss Screws. (fig.
41 .1 and 41 .3)
Narrow Angle
Bracket
Fig. 41.2
Flush
S0
Fig. 41.1
x 2 per
bracket
Back Roof
Panel
Flush
Hardware
12 x
#8 x 7/8" Truss Screw
S0
94
Fig. 41.3
Narrow Angle
Bracket
Flush
Front Roof
Panel
Other Parts
6 x Narrow Angle Bracket
Centred
S0
x 2
Advertisement
Table of Contents
