KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 113

Step 50: Attach Belt Swings and Acro Swing
A: Using 1 Threaded Quick Link per chain, join 1 Long Swing Chain to each side of the Swing Belt Seat .
Make sure to close the Threaded Quick Link tightly using an adjustable wrench. (fig. 50.1 and 50.2).
B: Using 1 Threaded Clip per chain, join the Short Swing Chain to the Acro Bar and Acro Handle . Make sure
to close the Threaded Clip tightly using an adjustable wrench. (fig. 50.2 and 50.3)
C: Attach the other end of the swing chains to the Spring Loaded Quick Links attached to the Heavy Duty
Swing Hangers. (fig. 50.1)
Fig. 50.1
Fig. 50.3
Threaded
Clip
Short
Chain
Long Chain
Swing
Belt Seat
Threaded Quick Links
attach to seat and Acro
bar .
Tighten Threaded Quick
Link using adjustable
wrench
Swing Belt
Seat
Fig. 50.2
Threaded
Clips
Acro Handles
113
Caution: Threaded Quick Links
must be installed with the gate
completely down covering
the threads and tighten as
instructed. (fig. 50.2)
Acro Bar
Other Parts
1 x Acro Bar
2 x Acro Handle
2 x Swing Belt Seat
2 x Short Chain
4 x Long Chain
6 x Threaded Quick Link