KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 70

Step 27: Counter Assembly
Part 1
A: Flush to each end and to the top of (2687) Counter Back attach 1 (5736) Counter Joist per end with 1 (S20) #8
x 1-3/8" Wood Screw per joist. Notice the remaining holes at the bottom of (2687) Counter Back. (fig. 27.1)
B: Place the remaining 2 (5736) Counter Joists centred over the pilot holes in the middle of (2687) Counter Back
and flush to the top of the board, then attach, in the top holes, with 1 (S20) #8 x 1-3/8" Wood Screw per joist. (fig.
27 .1)
Fig. 27.1
Flush
Wood Parts
1 x Counter Back 1 x 4 x 40-5/8"
2687
4 x Counter Joist 1 x 2 x 8-1/4"
5736
S20
Hardware
4 x #8 x 1-3/8" Wood Screw
S20
70
5736
Flush
2687
Flush
Notice hole
locations