KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 47

Step 13: Attach Swing End to Swing Beam
A: Place Swing End Assembly against Swing Beam Assembly then place 1 Beam Bracket on each side of the
assembly (they are specific for left and right side) and attach with 5 (G21) 5/16 x 3-3/4" Hex Bolts (with 2 flat
washers and 1 lock nut). (fig. 13.1 and 13.2)
Fig. 13.1
Swing End
Assembly
Swing Beam
Assembly
Fig. 13.2
LN2
FW2
Swing End
Assembly
Hardware
5 x 5/16 x 3-3/4" Hex Bolt
G21
(5/16" flat washer x 2, 5/16" lock nut)
47
Beam
Bracket
Swing Beam
Assembly
G21
Other Parts
2 x Beam Bracket (Left/Right)