KidKraft KINGSBRIDGE Installation And Operating Instructions Manual page 81

Step 30: Attach Flange Assembly to Fort
Part 2
D: Place (8934) SL Gusset tight to (2768) Panel Floor, flush to the top of the bottom opening and attach to
Flange Assembly with 2 (S6) #12 x 1" Pan Screws. (fig. 30.4 and 30.5)
E: Pre-drill pilot hole with a 3/16" drill bit then attach (8934) SL Gusset to (2768) Panel Floor with 1 (WL5) 1/4
x 2-1/2" Wafer Lag (with flat washer). (fig. 30.4 and 30.5)
Fig. 30.5
8934
2768
Flush
Wood Parts
1 x SL Gusset 1-1/4 x 3 x 15-3/4"
8934
Flange
S6
Assembly
1/4" Flat
Washer
2 x
1 x
Fig. 30.4
8934
2768
WL5
Hardware
#12 x 1" Pan Screw
S6
1/4 x 2-1/2" Wafer Lag (1/4" flat washer)
WL5
81
Flange
Assembly