Fig. 11.1; Flush - KidKraft SPRINGFIELD II Installation And Operating Instructions Manual

Step 11: Attach Gusset to Fort
A: Make sure the assembly is square before proceeding.
B: From the inside of the assembly, attach (0312) Gusset flush to the outside edge of (1500) Post on the Swing
Wall using 2 (S4) #8 x 3" Wood Screws. The other end of the gusset should be tight against (1764) Floor Front.
(fig. 11.1 and 11.2)
C: Attach the other end of (0312) Gusset to (1764) Floor Front with 1 (S4) #8 x 3" Wood Screw and 1 (S3) #8 x
2-1/2" Wood Screw, as shown in fig. 11.1 and 11.2.

Fig. 11.1

Swing Wall Side
Wood Parts
1 x Gusset 2 x 3 x 16"
0312
1764
1500
3 x
1 x
S4

Flush

1500
Hardware
#8 x 3" Wood Screw
S4
#8 x 2-1/2" Wood Screw
S3
26
1764
S3
S4
0312
Fig. 11.2