Ide Drive 1/Ide Drive 2/Ide Drive 3/Ide Drive 4 Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

8.2.3 IDE Drive 1/IDE Drive 2/IDE Drive 3/IDE Drive 4
Submenu
Appears when [IDE Drive1/2/3/4] is selected from the [Main] menu.
Sets the type and operating mode for connected IDE devices.
Main
IDE Drive 1: [None]
Type:
Transfer Mode:
LBA Translation:
32Bit I/O:
PIO Mode:
Ultra DMA Mode:
F1 Info Select Item
Esc Exit
Select Menu
Item
Type
Transfer Mode
LBA Translation
32Bit I/O
PIO Mode
Ultra DMA Mode
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Enabled]
[Standard]
[Disabled]
-/+ Change Values
Enter Select Sub-Menu
table: Items of IDE Drive 1/2/3/4 Menu Window
Setting
Auto (Fixed parameter)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Enabled (Fixed parameter)
• IDE1/2/4
Standard (Fixed parameter)
• IDE3
PIO4/DMA2 (Fixed
parameter)
• IDE1/2/4
Disabled (Fixed parameter)
• IDE3
Mode 2 (Fixed parameter)
PRIMERGY RX300 S2 User's Guide
Item Specific Help
Setup Defaults
F9
Previous Values
F7
Description
Sets the type of the IDE device.
Automatically detects and displays the number of
sectors that can be transferred at once.
Sets whether to enable or disable the LBA (Logical
Block Addressing: access based on logical serial
numbers).
Specifies the bus width for data transfer between
the CPU and the IDE controller.
Sets the data transfer mode.
Sets the DMA (Direct Memory Access) data
transfer mode.
8
227