Fujitsu PRIMERGY RX300 S2 User Manual page 126

Chapter 4 Manual OS Installation
6
Click [Close] to close the properties window.
■ Installing the LAN Driver
Perform the following procedures on each [Ethernet controller] under [Other devices] in [Device
Manager].
1
Insert the driver disk created from the ServerStart CD-ROM into the server.
For the onboard LAN, insert the ServerStart CD-ROM.
2
Double-click [Ethernet controller] under [Other devices].
The properties window for the Ethernet controller appears.
3
Click [Reinstall Driver] in the [General] tab window.
The [Welcome to the Hardware Update Wizard] window appears.
4
Select [Install the software automatically (Recommended)] and click [Next].
The driver will be installed.
5
Click [Finish].
6
Click [Close] to close the properties window.
7
Eject the driver disk and restart the system.
After LAN driver installation, names of the LAN devices are displayed as follows.
Onboard LAN (1000BASE-T)
PG-1852
PG-1862
PG-1882/PG-1882L
PG-1892/PG-1892L
126
table: LAN device name
LAN cards
Broadcom NetXtreme Gigabit Ethernet
Intel(R) PRO/1000 MT Desktop Adapter
Intel(R) PRO/1000 MT Dual Port Server Adapter
Intel(R) PRO/1000 MF Server Adapter (LX)
Intel(R) PRO/1000 MT Server Adapter
LAN device name