Main Menu - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.2 Main Menu

The [Main] menu window is initially displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured in the [Main] menu window.
Main
System Time:
System Date:
Diskette A:
IDE Drive 1:
IDE Drive 2:
IDE Drive 3:
IDE Drive 4:
Boot Options
Base Memory:
Extended Memory:
Info
F1
Esc Exit
Item
System Time
System Date
Diskette A
IDE Drive 1
IDE Drive 2
IDE Drive 3
IDE Drive 4
Boot Options
Base Memory
Extended Memory
226
PhoenixBIOS Setup Utility
Advanced Security Server
[HH:MM:SS]
[MM:DD:YYYY]
[1.4M]
[None]
[None]
[SR244W-(SM)]
[None]
640 KB
xxx M
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Main Menu
Setting
Present time
Present date
1.4M (Fixed parameter)
[Enter]
[Enter]
Available base memory size of up to 1MB is displayed.
Memory size of 1MB or more is displayed.
Exit
Item Specific Help
F9 Setup Defaults
Previous Values
Sub-Menu F7
Description
The system time is set in "hours:minutes:seconds"
format. The hours should be based on a 24-hour
clock.
For example, 6:30:00 P.M. is set as "18", "30",
"00".
Note:
If a highly precise system time is necessary,
install a network synchronized time system
(NTP, etc.).
The system date is set in "month:day:year" format.
For example, August 20, 2005 is set as "08", "20",
"2005".
Sets the type of Floppy Disk Drive A (recording
density and drive size).
Sets the type and operating mode for connected
IDE devices.
"8.2.3 IDE Drive 1/IDE Drive 2/IDE Drive 3/IDE
Drive 4 Submenu" (pg.227)
Sets system startup options.
"8.2.4 Boot Options Submenu" (pg.228)