Fujitsu PRIMERGY RX300 S2 User Manual page 115

3
Click [OK].
The [Initialization of ServerStart core running] window appears and unattended installation will
be started. Depending on the hardware configuration, this process may take a few minutes. When
the process is completed, the [Create a ServerStart Floppy Disk] window appears.
4
Click [or Insert a ServerStart Floppy Disk to Start ServerStart].
The [Welcome to ServerStart] window appears.
5
Eject the ServerStart floppy disk.
PRIMERGY RX300 S2 User's Guide
4
115