Security Menu - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.11 Security Menu

Configures the security features.
Main
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Info
F1
Esc Exit
Item
Setup Password
System Password
Set Setup Password
Setup Password Lock
Set System Password
System Password Mode
240
PhoenixBIOS Setup Utility
Advanced Security Server
Not Installed
Not Installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Security Menu
Setting
-
-
[Enter]
• Standard (at the time of
purchase)
• Extended
[Enter]
• System (at the time of
purchase)
• Keyboard
Exit
Item Specific Help
F9 Setup Defaults
Sub-Menu F7 Previous Values
Description
Displays whether a setup password is specified.
[Not installed] appears when the password is not
set, and [Installed] appears when it is set.
Displays whether an administrator password
(system password) is set or not.
[Not installed] appears when the password is not
set, and [Installed] appears when it is set.
Sets a setup password. The setup password prevents
unauthorized startup of the BIOS Setup.
Select this field and press the [Enter] key. Then
enter the setup password.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" ( pg.278).
Sets the scope protected by the setup password.
A setup password must be specified in advance.
Sets a system password. The system password
prevents unauthorized access to the system.
A setup password must be specified.
Select this field and press the [Enter] key. Then
enter the system password.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" ( pg.278).
Sets the scope protected by the system password. A
setup password and a system password must be
specified.