Available Internal Hard Disk Units; How To Install The Internal Hard Disk Unit - Fujitsu PRIMERGY RX300 S2 User Manual

7.6.2 Available Internal Hard Disk Units

■ Available Internal Hard Disk Units
Up to six internal hard disk units can be installed in 3.5-inch storage bays.
Product name
HDD U320 10K 73GB hot plug 1"
HDD U320 10K 147GB hot plug 1"
HDD U320 10K 300GB hot plug 1"
HDD U320 15K 73GB hot plug 1"
■ Contents of the Optional Internal Hard Disk Unit Package
Before installing internal hard disk units, refer to "Appendix B.3 Internal Hard Disk Unit Specifications"
( pg.296) to check the contents of the optional package.

7.6.3 How to Install the Internal Hard Disk Unit

1
Turn off the server and peripheral devices, then unplug the power cables from
the server.
"1.4.3 Turning Off the Server" (pg.33)
2
Touch a metal part of the server to discharge static electricity.
3
Remove the dummy unit from the bay to accommodate an internal hard disk
unit.
A dummy unit is inserted into a bay not occupied by an internal hard disk unit.
Slowly pull the dummy unit out towards you with the latches pressed inward.
Be sure to keep the removed dummy units for later use.
Dummy unit
table: List of available hard disks
Model
PG-HDH71K
PG-HDH41K
PG-HDH31K
PG-HDH75K
Press the tabs inward
PRIMERGY RX300 S2 User's Guide
Overview
73.4GB, 10,000rpm, Ultra320 SCSI
1 inch, hot plug supported
146.8GB, 10,000rpm, Ultra320 SCSI
1 inch, hot plug supported
300GB, 10,000rpm, Ultra320 SCSI
1 inch, hot plug supported
73.4GB, 15,000rpm, Ultra320 SCSI
1 inch, hot plug supported
7
203