Fujitsu PRIMERGY RX300 S2 User Manual page 249

Item
Subnet mask/Gateway
address
Front End n Mode
Front End n IP
table: Items on the RomPilot Submenu
Setting
-
• Disabled (at the time of
purchase)
• Enabled
-
PRIMERGY RX300 S2 User's Guide
Description
Sets the address of the subnet mask and default
gateway used in [Local IP address].
This item appears when [RomPilot Support] is set
to [Enabled].
Specifies a type of the terminal used for console
redirection with an IP address. Up to three IP
addresses are specifiable.
This item appears when [RomPilot Support] is set
to [Enabled].
8
249