Advanced System Configuration Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

8.2.8 Advanced System Configuration Submenu

Appears when [Advanced System Configuration] is selected from the [Advanced] menu.
Configures additional settings.
Advanced
Advanced System Configuration
PCI Bus Parity Checking:
Memory Redundancy:
Remap PCI Memory Gap:
CPU Mismatch Detection:
CPU Timeout Counter:
CPU Frequency(GHZ):
Hyper-Threading:
Limit CPUID Functions:
CPU Thermal Management:
CPU Halt Mode(C1E):
NX Memory Protection:
CPU MC Status Clear:
Enhanced SpeedStep:
CPU Throtting Delay:
USB Host Controller:
USB2.0 Host Controller:
USB BIOS Legacy Support:
Info
F1 Select Item
Esc Exit
Select Menu
Item
PCI Bus Parity Checking
Memory Redundancy
Remap PCI Memory Gap
CPU Mismatch Detection
CPU Timeout Counter
CPU Frequency (GHz)
Hyper-Threading
Limit CPUID Functions
CPU Thermal Management
PhoenixBIOS Setup Utility
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Automatic]
[Enabled]
[Disabled]
[Enhanced]
[Standard]
[Disabled]
[Next Boot]
[Disabled]
[No Delay]
[Enabled]
[Enabled]
[Disabled]
-/+ Change Values
Enter Select
table: Items on the Advanced System Configuration Submenu
Setting
Enabled (Fixed parameter)
• Disabled (at the time of
purchase)
• Sparing
• Mirroring
• Disabled (at the time of
purchase)
• Enabled
Enabled (Fixed parameter)
Disabled (Fixed parameter)
Automatic (Fixed
parameter)
• Disabled
• Enabled (at the time of
purchase)
Disabled (Fixed parameter)
Enhanced (Fixed
parameter)
PRIMERGY RX300 S2 User's Guide
Item Specific Help
F9 Setup Defaults
Previous Values
Sub-Menu F7
Description
Sets whether to enable or disable the PCI bus parity
checking.
Sets whether or not to use the spare memory or
mirror function.
To use the spare memory or mirror function, install
ServerView.
Specify an area to be allocated to PCI Memory Gap.
Note:
When installing 4GB or more memory, set to
[Enabled].
Sets whether to enable or disable checking the CPU
type and frequency.
The server does not support this.
Configures the CPU clock frequency.
Sets whether or not to run one CPU as a dual-
processing CPU. The setting [Enabled] may
enhance processing performance by allowing
maximum use of the CPU resources.
Configures the CPU internal setting.
Configures the CPU internal setting.
Note:
This item is displayed only when using the
3.6GHz CPU.
8
235