Peripheral Configuration Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

8.2.6 Peripheral Configuration Submenu

Appears when [Peripheral Configuration] is selected from the [Advanced] menu.
Configures the serial port, parallel port, etc.
The items not indicated below are displayed using the scroll bar.
Advanced
Peripheral Configuration
Serial 1:
Serial Multiplexer:
Serial 2:
Parallel:
Parallel Mode:
Diskette Controller:
Floppy Type:
Local Bus IDE adpter:
Mouse Controller:
SCSI Controller:
SCSI Option ROM Scan:
RAID:
LAN Controller:
LAN Remote Boot Ch.A:
LAN Remote Boot Ch.B:
Info
F1 Select Item
Esc Exit
Select Menu
Item
Serial 1
Serial Multiplexer
Serial 2
Parallel
PhoenixBIOS Setup Utility
[ Auto ]
[System]
[ Auto ]
[ Auto ]
[Bidirection]
[Enabled]
[Local]
[Both]
[Auto Detect]
[Channel A & B]
[Enabled]
[Enabled]
[Channel A & B]
[Disabled]
[Disabled]
-/+ Change Values
Enter Select Sub-Menu
table: Items on the Peripheral Configuration Submenu
Setting
• Disabled
• Enabled
• Auto (at the time of
purchase)
• OS Controlled
• System (at the time of
purchase)
• BMC
• Shared
• Disabled
• Enabled
• Auto (at the time of
purchase)
• OS Controlled
Auto (Fixed parameter)
PRIMERGY RX300 S2 User's Guide
Item Specific Help
F9 Setup Defaults
Previous Values
F7
Description
Sets whether to enable or disable the serial port. Set
to [Disabled] when used as a server management
port.
Note:
When changing [Serial Multiplexer] to
[BMC], be sure to set this item to [Disabled].
Changes the function of Serial Port 1.
• System
Used as a serial port (when the UPS is
connected).
• BMC
Used as a server management port. Set Serial1 to
[Disabled].
• Shared
This server cannot use this.
Note:
Do not set this item to [Shared].
Sets whether to enable or disable the serial port.
Sets whether to enable or disable the serial port.
8
231