Ipmi Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 8 Hardware Configuration/Utilities
Item
Wake Up Time
Wake Up Mode
Power Failure Recovery

8.2.10 IPMI Submenu

Appears when [IPMI] is selected from the [Advanced] menu.
Configures the Baseboard Management Controller (BMC).
IPMI
SEL Load
Clear System Event Log
Event Log Full Mode:
BMC Time Sync:
System Event Log
SDRR Browser
LAN Settings
F1 Info
Esc Exit
Item
SEL Load
Clear System Event Log
Event Log Full Mode
BMC Time Sync
238
table: Items on the Power On/Off Submenu
Setting
-
-
• Always Off
• Always On
• Previous State (at the
time of purchase)
PhoenixBIOS Setup Utility
Advanced
nn%
[Disabled]
[Overwrite]
[Enabled]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the IPMI Submenu
Setting
-
• Disabled (at the time of
purchase)
• Enabled
• Overwrite (at the time of
purchase)
• Maintain
Enabled (Fixed parameter)
Description
Configures the power-on time setting using the
timer.
Specifies the power-on interval using the timer.
Sets the server power status after system down due
to power failure or after power recovery by the
UPS.
Note:
Set this item to [Always ON] when a UPS is
used.
Item Specific Help
Setup Defaults
F9
F7 Previous Values
Sub-Menu
Description
Displays the stored SEL in percentage.
Deletes logs stored in System Event Log (SEL).
(Do not delete SEL from this menu.)
Configures the log when full SEL is indicated.
Sets whether or not to synchronize the BMC
internal timer with RTC at startup.