Fujitsu PRIMERGY RX300 S2 User Manual page 239

Item
System Event Log
SDRR Browser
LAN Settings
■ LAN Settings Submenu
Performs LAN settings to enable remote operations using RemoteControlService.
Item
Local IP address
Subnet mask
Gateway address
User ID 1 Password
table: Items on the IPMI Submenu
Setting
[Enter]
[Enter]
[Enter]
table: Items on the LAN Settings Submenu
Setting
-
-
-
-
PRIMERGY RX300 S2 User's Guide
Description
Displays the SEL contents.
The system event log this submenu displays is a
reference SEL. To display SEL in detail, refer to
"9.3 System Event Log" ( pg.273).
Displays each sensor data item.
Performs LAN settings to enable remote operations
using RemoteControlService.
■
" LAN Settings Submenu" (pg.239)
Description
Enter the IP address of the onboard LAN.
Note:
Set an IP address different from that in OS
settings.
Enter the subnet mask of the onboard LAN
specified in [Local IP address].
Enter the gateway address of the onboard LAN
specified in [Local IP address].
Enter the user ID 1 password of the onboard LAN
specified in [Local IP address].
8
239