Power On/Off Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

8.2.9 Power On/Off Submenu

Appears when [Power On/Off] is selected from the [Advanced] menu.
Configures power On/Off settings.
Advanced
Power On/Off
Power Off Source
Software:
Power Button:
Power On Source:
Remote:
LAN:
Wake Up Timer:
Wakeup Up time:
Wakeup Up Mode:
Power Failure Recovery: [Previous State]
Info
F1 Select Item
Exit
Esc Select Menu
Item
Power Off Source
Software
Power Button
Power On Source
Remote
LAN
Wake Up Timer
PhoenixBIOS Setup Utility
[Enabled]
[Enabled]
[BIOS Controlled]
[Enabled]
[Enabled]
[Disabled]
[00:00:00]
[Daily]
-/+ Change Values
Enter Select Sub-Menu
table: Items on the Power On/Off Submenu
Setting
-
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled (at the time of
purchase)
• BIOS Controlled (at the
time of purchase)
• ACPI Controlled
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled (at the time of
purchase)
Disabled (Fixed parameter)
PRIMERGY RX300 S2 User's Guide
Item Specific Help
F9 Setup Defaults
F7 Previous Values
Description
-
Sets whether or not to enable the power to be turned
off using a program or the operating system.
Sets whether or not to allow the use of the power
switch for turning the power off, when the ACPI
function is disabled.
Sets to turning the power on.
Sets whether or not the power is turned on when the
modem (connected to the serial port) receives a ring
signal.
Sets whether or not to enable the power to be turned
on via LAN.
Sets whether or not the power is turned on at a
certain time or after a certain time has passed.
8
237