Replacing System Fan - Fujitsu PRIMERGY RX300 S2 User Manual

PRIMERGY RX300 S2 User's Guide

7.10Replacing System Fan

This server supports the redundant system fan function. Even if one of the system
fans fails, the system will continue to operate.
When a system fan causes a fault, the LED of the system fan blinks amber.
If the LED lights amber, the system fan need to be replaced.
Contact an office listed in the "Contact Information" of the "Start Guide".
Replace a failed system fan as soon as possible.
The system fan numbers are as follows.
FAN6 FAN4 FAN2 FAN0
FAN7 FAN5 FAN3 FAN1
LED
7
215