Fujitsu PRIMERGY RX300 S2 User Manual page 28

Chapter1 Overview
g Power connector1
h Power connector2
i Power connector3
j USB connector
k Control panel connector
l IDE connector
An IDE cable of the internal CD-ROM drive is plugged in.
m Floppy disk drive connector
A floppy disk drive cable is plugged in.
n SMB connector
o SCSI connector A
An internal hard disk unit is plugged in.
p SCSI connector B
An internal hard disk unit is plugged in.
q Array cache memory slot
r Internal power connector
An internal power cable is plugged in when a remote service board is installed. For more details,
●
refer to "
on Installation" ( pg.191).
s Server control connector
A server control cable is plugged in when a remote service board is installed. For more details,
●
refer to "
on Installation" ( pg.191).
28
Remote Service Board" ( pg.193) in "7.5.2 Installable Expansion Cards and Notes
Remote Service Board" ( pg.193) in "7.5.2 Installable Expansion Cards and Notes