Fujitsu PRIMERGY RX300 S2 User Manual page 247

table: Items on the Console Redirection Submenu
Item
Baud Rate
Protocol
Flow Control
Mode
Setting
• 1200
• 2400
• 4800
• 9600 (at the time of
purchase)
• 19.2K
• 38.4K
• 57.6K
• 115.2K
• VT100
• VT100, 8bit
• PC-ANSI, 7bit
• PC-ANSI
• VT100+ (at the time of
purchase)
• None
• XON/XOFF
• CTS/RTS (at the time of
purchase)
• Standard
• Enhanced (at the time of
purchase)
PRIMERGY RX300 S2 User's Guide
Description
Sets the baud rate for console redirection.
This item appears when [Console Redirection] is
set to [Enabled].
Sets the console type for console redirection.
This item appears when [Console Redirection] is
set to [Enabled].
Sets the flow control.
This item appears when [Console Redirection] is
set to [Enabled].
Sets the range of use for console redirection.
This item appears when [Console Redirection] is
set to [Enabled].
8
247