Boot Options Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.4 Boot Options Submenu

Appears when [Boot Options] is selected from the [Main] menu.
Sets system startup options.
Main
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
Boot Menu:
MultiBoot for HDs
Boot Sequence:
F1 Info
Esc Exit
Item
POST Errors
Keyboard Check
SM Error Halt
Fast Boot
Quiet Boot
228
PhoenixBIOS Setup Utility
Boot Options
[Halt On All Errors]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the Boot Options Submenu
Setting
Halt On All Errors (Fixed
parameter)
• Disabled
• Enabled (at the time of
purchase)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Disabled (Fixed parameter)
Item Specific Help
Setup Defaults
F9
F7 Previous Values
Sub-Menu
Description
Sets whether or not to stop the boot process and
shut down the system, in case a POST (Power On
Self Test) error is detected.
• No Halt On Any Errors
It does not stop the boot process. Detected errors
are ignored.
• Halt On All Errors
When a POST (Power On Self Test) error is
detected, it stops the boot process and shuts
down the system when POST is completed.
Sets whether or not to check keyboard connection
during POST.
Sets the procedure in case an error occurs regarding
the fan or temperature sensor.
Sets whether or not to reduce the scope of POST
and thereby speed up system startup.
Sets whether or not to display the logo screen
instead of POST information.