Cpu Status Submenu - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.13 CPU Status Submenu

Appears when [CPU Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed CPU.
CPU 0 Status [Enabled]
CPU 1 Status [Enabled]
Info
F1
Exit
Esc
Item
CPU 0 Status
CPU 1 Status
244
PhoenixBIOS Setup Utility
Server
CPU Status
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the CPU Status Submenu
Setting
Enabled (Fixed parameter)
Item Specific Help
F9 Setup Defaults
Sub-Menu F7 Previous Values
Description
Sets whether or not to allow the use of CPUs
installed in CPU Sockets 0 and 1.
If the item is set to [Disabled] or [Failed], change
the setting to [Enabled] after replacing the CPU.