Connection Of An Optional Devices; Connection Examples Of Internal Option Devices - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 7 Installing Internal Options
7.11Connection of an Optional
Devices
This section explains the connection of optional devices.

7.11.1 Connection Examples of Internal Option Devices

The following shows connection examples of internal option devices. Connection conditions vary
depending on examples. See each example.
■ Installing the Internal Hard Disk Units in the Array System
Configuration
The following shows the system configuration and cable connection examples in the array system
configuration using the onboard SCSI array controller (standard).
[Standard]
[When internal backup devices are installed]
SCSI Ctrl U160 lp
(PG-130L)
After attaching internal options, take care so that it does not come in contact with the close boards,
such as expansion card.
216
SCSI connector A
SCSI connector B
SCSI cable 68 pin
(standard)
SCSI connector A
SCSI connector B
Internal hard disk units
SCSI cable 68 pin (standard)
Internal hard disk unit
Internal DAT72 unit
SCSI cable
(attached to internal DAT72 unit)