Advanced Menu - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.5 Advanced Menu

Configures peripheral and PCI devices.
Main
Setting items on this menu to incorrect values
may cause your system to malfunction.
Peripheral Configuration
PCI Configuration
Advanced System Configuration
Power On/Off
IPMI
Reset Configuration Data:
Multiprocessor Specification:
Info
F1
Esc Exit
Item
Peripheral Configuration
PCI Configuration
Advanced System
Configuration
Power On/Off
IPMI
Reset Configuration Data
Multiprocessor
Specification
230
PhoenixBIOS Setup Utility
Advanced Security Server
Setup Warning
[No]
[1.4]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Advanced Menu
Setting
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
• Yes
• No (at the time of
purchase)
1.4 (Fixed parameter)
Exit
Item Specific Help
F9 Setup Defaults
Previous Values
Sub-Menu F7
Description
Configures the serial port, parallel port, etc.
"8.2.6 Peripheral Configuration Submenu"
(pg.231)
Configures the PCI device.
"8.2.7 PCI Configuration Submenu" (pg.233)
Configures additional settings.
"8.2.8 Advanced System Configuration
Submenu" (pg.235)
Configures power On/Off settings.
"8.2.9 Power On/Off Submenu" (pg.237)
Configures the Baseboard Management Controller
(BMC).
"8.2.10 IPMI Submenu" (pg.238)
Sets the initialization of the Extended System
Configuration Data (ESCD) where the system
resources are recorded.
Sets the version of the multiprocessor table to be
used.
The multiprocessor table is necessary for the
operating system for multiprocessors to recognize
the system's multiprocessor specifications.