Starting Remote Installation Using A Remote Resource Server - Fujitsu PRIMERGY RX300 S2 User Manual

Chapter 3 OS Installation Using ServerStart
3.4.6 Starting Remote Installation Using a Remote
Resource Server
In remote installation using a remote resource server, installation is performed using shared resources on
the remote resource server.
Perform "3.4.4 Preparation of Remote Resources" ( pg.97) before starting installation.
■ Configuring a Remote Floppy
A remote floppy is a shared folder for storing and using a configuration file on the network, instead of
loading it from the ServerStart floppy disk. When the server does not have a floppy disk drive and
installation is performed in guided mode or expert mode, use a remote floppy.
1
Create a new folder in the shared folder on the remote resource server.
E.g.: C:\export\ServerStart\Floppy
2
Create a "ServerStart Floppy Disk" tag file for the ServerStart floppy disk. Start
up Command Prompt and enter the following command.
C:\>copy nul C:\export\ServerStart\Floppy\"ServerStart Floppy Disk"
102