Ctl Head Replacement - Sony Betacam SX DNV-5 Maintenance Manual

3-3-6. CTL Head Replacement

3-3-6. CTL Head Replacement
Outline
Replacement
CTL/FE head assembly removal
CTL head replacement
CTL/FE head assembly installation
CTL/FE head assembly cleaning
Adjustment after replacement
Tape running confirmation
Video tracking adjustment
CTL head height adjustment
CTL head position adjustment
TC head position adjustment
c
Never touch the tape cleaner on the entrance head block with bare heads.
The tape cleaner has a sharp edge. Extreme caution should be taken when replacing or adjusting the CTL
head.
Preparations
1. Confirm that the unit is in the unthreading end state.
2. Turn off the power.
3. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
Tools
. Torque screwdriver bit (for M2) J-6325-380-A
. Torque screwdriver (for 3 kg)
. Cleaning cloth
. Cleaning fluid
3-52
J-6325-400-A
3-184-527-01
9-919-573-01
DNV-5
DNW-7/90/90WS