Sony Betacam SX DNV-5 Maintenance Manual page 20

2-1. Setup Menu
Viewfinder screen (Factory default setting)
** FUNCTION 2/2 **
GENLOCK : ON
CAM RET. : OFF
FILTER INH. : OFF
FIELD/FRAME : FLD
A. IRIS OVERRIDE : OFF
DYNALATITUDE : OFF
* WIDE SCREEN *
16:9/4:3 MODE : 16:9
VF ASPECT : AUTO
BOX/4:3 LIMITS : BOX
"16:9" BARS ID : OFF
"16:9" VF ID : OFF
2-6
Description
........... Sets whether to synchronize the internal reference signal with the external input
video signal supplied to the GENLOCK IN connector.
........... Sets whether to display the return video signal input to the GENLOCK IN
connector on the viewfinder screen when the RET button is pressed ON.
........... Sets whether to interlock the white balance correction value to the filter
position.
ON : The white balance correction value is not interlocked to the color
temperature conversion filters ; The memory A and the memory B store
one adjustment value respectively.
OFF : The white balance correction values for the respective color temperature
conversion filters are stored in the memories A and B.
Four for memory A and four for memory B, total eight values can be
stored.
........... Sets the type of the CCD data read-out system.
FLD : Field read mode. Normally set to this position.
FRM : Frame read mode. This position is selected when improved vertical
resolution is desired.
n
The frame read mode has more image lag than the field read mode.
........... Sets whether to activate the auto iris override function.
When this item is set to ON, the reference value of the auto iris adjustment can
be changed using the rotary encoder when menu is set to OFF.
(Five steps : Irises off –1/2, –1/4, 0, +1/4, and +1/2)
........... Sets whether to active the dynalatude function.
Detects a high contrast signal that white and/or black level becomes flat, and
correct to the suitable contrast. (Four steps : OFF, LOW, MID and HI)
(DNW-90WS/90WSP only)
........... Sets the aspect ratio of the video signal output from the VIDEO OUT and TEST
OUT connectors.
........... Sets the aspect ratio on the viewfinder.
AUTO : Sets the aspect ratio set by 16:9/4:3 MODE setting.
4:3 : Sets the aspect ratio to 4:3 regardless of 16:9/4:3 MODE setting.
16:9A : Sets the aspect ratio to 16:9 regardless of 16:9/4:3 MODE setting
(displays the erea of 4:3 mode with the marker).
16:9B : Sets the aspect ratio to 16:9 regardless of 16:9/4:3 MODE setting
(video level is cut in half out of the safety zone area on the VF
screen).
........... Sets the function of the box cursor.
BOX : Operates as the normal cursor function.
4:3 : Displays the erea of 4:3 mode when the 16:9/4:3 MODE set to
16:9.
........... Sets whether to add the "16:9" character in the color bars signal genarated in
this unit when the 16:9/4:3 MODE set to 16:9.
........... Sets whether to add the "16:9" character on the VF screen when the 16:9/4:3
MODE set to 16:9.
DNV-5
DNW-7/90/90WS