Y/C Delay Adjustment (Dnv-5 Only); R-Y Delay Adjustment; B-Y Delay Adjustment - Sony Betacam SX DNV-5 Maintenance Manual

7-6. Y/C Delay Adjustment (DNV-5 only)

7-6. Y/C Delay Adjustment (DNV-5 only)
Preparation
. Connect as follows.
. Input a bowtie signal to the camera connector on the
VA-5.
. Put into the BOWTIE mode to the waveform monitor.
SG
Y VA-5 DNV-5
R-Y
B-Y CAMERA

7-6-1. R-Y Delay Adjustment

Adjustment procedure
1. Equipment : Waveform monitor
Test point : SDI OUT connector (CA-701)
2. On the DIAG menu, adjust as follows.
PAGE : DIAG G-1 (REC VIDEO ADJ DATA-1)
ITEM : 2 (R-Y DELAY)
: 0 ±5 ns
Spec.
Y/R-Y
-20ns +20ns
Center marker
7-6
WFM601
CA-701
SDI SER
OUT IN
Y/B-Y
-20ns +20ns
Center marker

7-6-2. B-Y Delay Adjustment

Adjustment procedure
1. Equipment : Waveform monitor
Test point : SDI OUT connector (CA-701)
2. On the DIAG menu, adjust as follows.
PAGE : DIAG G-1 (REC VIDEO ADJ DATA-1)
ITEM : 3 (B-Y DELAY)
: 0 ±5 ns
Spec.
Y/R-Y
-20ns +20ns
Center marker
Y/B-Y
-20ns +20ns
Center marker
DNV-5
DNW-7/90/90WS