Fe Head Replacement - Sony Betacam SX DNV-5 Maintenance Manual

3-3-14. FE Head Replacement

Outline
Replacement
CTL/FE head assembly removal
FE head removal
FE head replacement
CTL/FE head assembly installation
CTL/FE head assembly cleaning
Adjustment after replacement
Tape running adjustment
c
Never touch the tape cleaner on the entrance head block with bare hands.
The tape cleaner has a sharp edge. Pay careful attention when replacing or adjusting
the CTL head.
Preparations
1. Confirm that the unit is in the unthreading end state.
2. Turn off the power.
3. Remove the front lid and outside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
n
The FE head can be replaced with the cassette compartment installed in the unit.
Tools
. Torque screwdriver bit (for M2)
. Torque screwdriver (for 3 kg)
DNV-5
DNW-7/90/90WS
http://getMANUAL.com
J-6325-380-A
J-6325-400-A
3-3-14. FE Head Replacement
3-75