Removal And Installation Of Ccd Block (Only For Dnw-7/7P/90/90P/90Ws/90Wsp) - Sony Betacam SX DNV-5 Maintenance Manual

3-4. Removal and Installation of CCD Block (Only for DNW-7/90/90WS)
3-4. Removal and Installation of CCD Block
(Only for DNW-7/7P/90/90P/90WS/90WSP)
n
Replacement CCD unit BKNW series be available through a sales route.
Outline
Removal and installation
Front assembly removal
Filter knob removal
CCD block removal
CCD block installation
Filter knob installation
Front assembly installation
Adjustment after installation
Tape running adjustment
AD clock phase check
Preparations
1. Turn off the power.
2. Open the inside panel.
(Refer to section 1-6 in Part 1 of the Maintenance Manual.)
Tools
. Torque screwdriver bit (for M1.4)
. Torque screwdriver bit (for M2)
. Torque screwdriver (for 3 kg)
. Screwdriver hexagon bit (45) (across 0.89 mm)
. Screwdriver hexagon bit (across 2.5 mm)
. Cleaning cloth
. Cleaning fluid
3-102
J-6325-110-A
J-6325-380-A
J-6325-400-A
J-6322-420-3
J-6530-100-A
3-184-527-01
9-919-573-01
DNV-5
DNW-7/90/90WS