Sony Betacam SX DNV-5 Maintenance Manual page 33

Setup menu check sheet
<CANCEL> Yes or No is displayed to indicate whether the value set by the UP/DOWN button can be canceled using
the CANCEL/PRST switch.
<PRESET> Yes or No is displayed to indicate whether the factory default value can be returned using the CAN-
CEL/PRST switch.
<SETUP C> Yes or No is displayed to indicate whether data can be written in the setup card.
<RM-P9> M, P, or No is displayed to indicate whether this item can be operated when remote control unit RM-P9
is connected.
M (MENU)
P (PANEL)
No
<F-SET> Sets the factory default value.
<C-SET> Write the setting state of the customer.
DNV-5
DNW-7/90/90WS
: Can be operated at the bottom of the RM-P9.
: Can be operated in the front of the RM-P9.
: Cannot be operated by the RM-P9.
2-1. Setup Menu
2-19