Sony Betacam SX DNV-5 Maintenance Manual page 134

3-3-18. S Slider Assembly Replacement
Tools
. FWD back-tension measurement cassette
. Stop washer insertion tool
. Cleaning cloth
. Cleaning fluid
. Torque screwdriver bit (for M1.4)
. Torque screwdriver (for 3 kg)
Removal
1. Full-top sensor assembly removal
(Refer to section 3-3-22.)
2. Tension regulator band assembly
removal
(Refer to section 3-3-12.)
3. Tension regulator assembly removal
(Refer to section 3-3-12.)
4. Threading arm assembly removal
(Refer to section 3-3-20.)
5. Cassette stopper removal
(Refer to section 3-3-17.)
6. S rail removal
(1) Remove the five screws and one stop washer.
(2) Lift the front part of the S rail slightly in the
direction indicated by arrow A, then remove
the S rail in the direction indicated by arrow
B together with the S slider assembly.
n
Do not apply excessive force to the gear ST
arm when removing the stop washer.
3-84
J-6323-190-A
J-6323-530-A
3-184-527-01
9-919-573-01
J-6325-110-A
J-6325-400-A
S slider assembly
Stop washer
Screw
(P1.4 x 3.5)
S rail
A
Gear ST arm
Screws
(P1.4 x 3.5)
B
DNW-7/90/90WS
DNV-5